Kodak DCS300 User Manual
6-15
6
Ge
ne
ra
ne
ra
l
Operating in Auto-Multi Program
1
Press and hold the MDE button
and rotate the Main-Command
dial until P appears in the
Camera Status LCD panel and
viewfinder.
and rotate the Main-Command
dial until P appears in the
Camera Status LCD panel and
viewfinder.
If the exposure meter and LCD
indications automatically turn
Off, turn them On again by
lightly pressing the Shutter
Release button.
indications automatically turn
Off, turn them On again by
lightly pressing the Shutter
Release button.
2
Look inside the viewfinder,
compose your shot, lightly press
the Shutter Release button, then
confirm focus and automatically
set the shutter speed/aperture
value.
compose your shot, lightly press
the Shutter Release button, then
confirm focus and automatically
set the shutter speed/aperture
value.
To change the shutter speed/
aperture combination, refer to
the “Operating in Flexible
Program” section on page 6-17.
aperture combination, refer to
the “Operating in Flexible
Program” section on page 6-17.
3
Fully depress the Shutter
Release button to capture an
image.
Release button to capture an
image.
SET
FNC
( )
MDE
Ps
BUSY
RESET
+/-
F
PRINT
TYPE
F
F