Kodak DCS300 User Manual
10-4
Disconnecting your Camera From the Computer
You can connect or disconnect the camera without turning the camera or the computer Off.
1
If the Kodak Software is running, click the Done button in the Kodak Software Image
window.
window.
2
Unplug the cable.
Using the Card Reader
If your computer has a card reader, you can access images by placing a PC Card
containing camera images into the reader. If you have a new card reader, install it using the
instructions accompanying the reader.
containing camera images into the reader. If you have a new card reader, install it using the
instructions accompanying the reader.
Refer to the computer documentation on the use of a card reader.
1
Remove the PC Card from your camera. Refer to “Removing a PC Card” on page 4-3.
2
Insert the PC Card into the card reader on your computer.
Some computer systems (for example, Windows NT 4.0) require you to reboot each
time you insert a PC Card into the reader.
time you insert a PC Card into the reader.
3
You can now access images on the PC Card using the Kodak Software.9 Refer to the
KODAK PROFESSIONAL DCD Host Software User’s Manual on the DCS Host
Software CD included with your camera.)
KODAK PROFESSIONAL DCD Host Software User’s Manual on the DCS Host
Software CD included with your camera.)
4
Macintosh only: Drag the PC Card icon to the trash prior to ejecting the card from the
card reader.
card reader.
IMPORTANT:
Close the Kodak Software Image window before you disconnect the camera from the
computer. Otherwise, you may lose data from the PC Card.
computer. Otherwise, you may lose data from the PC Card.