Kodak DCS300 User Manual
11-3
11
Ca
mer
mer
a
Ca
re
Antialiasing Filter (DCS 330 Only)
The DCS 330 contains an antialiasing filter which helps prevent aliasing at certain focal
distances. It may be necessary to remove the antialiasing filter for cleaning. While it is not
essential, you can wear lint-free, static-free gloves, available from your camera dealer.
distances. It may be necessary to remove the antialiasing filter for cleaning. While it is not
essential, you can wear lint-free, static-free gloves, available from your camera dealer.
Removing, Cleaning, and Re-installing the Antialiasing Filter
CAUTION:
If you break the glass on the antialiasing filter while it is in the camera, call your
service representative. The broken glass can damage the imager and other parts
of the camera.
service representative. The broken glass can damage the imager and other parts
of the camera.
DCS 330: Do not attempt to install an IX-Nikkor lens when the antialiasing filter
is in place. These lenses can break the filter.
is in place. These lenses can break the filter.
1
Turn the camera Off.
2
Remove the lens from the
camera. Refer to “Removing the
Lens” on page 1-22.
camera. Refer to “Removing the
Lens” on page 1-22.
CAUTION:
Be very careful when
removing the filter, as it is
fragile.
removing the filter, as it is
fragile.