Kodak DCS300 User Manual
1-22
Removing the Lens
Non-CPU Lenses and Lens Adapters
You should be aware of the following when using non-CPU lenses:
✔ If you are using a microscope adapter, you will need to set the camera to Manual
Exposure mode (M).
✔ In Manual Exposure mode (M), the camera’s exposure meter does not function.
For exposure metering, use the camera’s Histogram feature (page 9-5) or use an
external exposure meter.
external exposure meter.
✔ Set the Exposure mode to Manual (M). (In other Exposure modes, the shutter is
locked.)
✔ The shutter speed indication appears in the Camera Status LCD panel and inside
the viewfinder. Set the shutter speed by rotating the Main-Command dial. The
f-number of the aperture will not be visible in the Camera Status LCD panel or the
viewfinder. (F-- always appears.) Set the aperture by rotating the lens aperture ring.
f-number of the aperture will not be visible in the Camera Status LCD panel or the
viewfinder. (F-- always appears.) Set the aperture by rotating the lens aperture ring.
Press and hold the Lens Release
button, then turn the lens clockwise.
button, then turn the lens clockwise.
☛
If you are storing the camera
without the lens attached, you
should always attach the body
cap.
without the lens attached, you
should always attach the body
cap.
M
AF