Polycom 512 User Manual

ViewStation User’s Guide

43

You can adjust the pan, tilt and zoom of near- and far-site cameras. You can also 
enable the camera to track voices automatically or track to presets.

Controlling the Camera

To select the camera to control, use the remote control to:

•

Move your near-site camera. Press the NEAR button on the remote. 

A camera icon 

 facing toward the near-site will appear in the top right 

corner of the main monitor. 

•

Move the main far-site camera during a call. Press the FAR button on the 
remote. 

A camera icon 

 facing toward the far-site will appear in the top right 

corner of the main monitor.

•

Select another local camera. Press NEAR twice to bring up icons for all of 
the connected local cameras. Then use the arrow buttons to highlight the 
appropriate icon. Some icons appear regardless of the connection or 
availability of cameras. Refer to your QuickStart booklet to verify the 
connection of auxiliary devices before attempting to use them.

You cannot disconnect the main camera, but you can 

select a primary camera (such as a document camera) as 

the camera that will be used each time you power-on the 

ViewStation. To select the primary camera, go to the 

System Info

➢Setup➢Video/Camera screen.