Kodak DCS Pro SLR/n User Manual
April 29, 2004
C-1
Appendix C: Troubleshooting
In addition to the issues described in this section, the following Web page
provides answers to many of your questions:
provides answers to many of your questions:
.
Problems Indicated in the Top Status LCD
Top Status LCD
Viewfinder
Cause
Remedy
fEE blinks
fEE blinks
Lens is not set to its minimum
aperture.
aperture.
Set lens to minimum aperture.
fEE blinks
P blinks
Attached Speedlight is not set at TTL
Auto Flash in P mode.
Auto Flash in P mode.
Set the Speedlight flash mode to
TTL, or set the Exposure mode to S,
A, or M.
TTL, or set the Exposure mode to S,
A, or M.
appears
—
Battery is low.
Have fresh battery ready.
blinks
—
Battery needs to be charged.
Remove the battery and charge it.
—
blinks
Autofocus is not possible.
Focus manually.
HI appears
HI appears
Overexposure warning (subject is
too bright).
too bright).
In P mode, use an ND filter.
In S mode, select a faster shutter
speed.
speed.
In A mode, select a smaller
aperture (larger f-number).
aperture (larger f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use an ND filter.)
after trying the remedy in S or A
mode, use an ND filter.)