Kodak DCS Pro SLR/n User Manual

This chapter describes features and methods for configuring your KODAK 
PROFESSIONAL DCS Pro SLR/n Digital Camera. 

You can set separate battery save times for the camera and the Image LCD. 

To conserve battery power, your camera goes into a low-power mode if not 
used for a specified amount of time. 

1. Choose Battery Save from the Tools menu, choose Camera, then 

highlight the desired time-out.

2. Press the OK button.

NOTE:  When the Camera Battery Save time elapses, both the Image LCD 

and the Top Status LCD turn off. To exit the Battery Save state, turn 
the D-Dial to OFF, then turn it to Single Frame shooting. 
Alternatively, lightly press the Shutter Release button.

NOTE:  If the camera has an IEEE 1394 connection to a computer that is 

turned on, the camera never enters the Battery Save state. As long 
as the IEEE 1394 connection remains, the camera stays "awake", 
checking to see if the DCS Camera Manager software is running.

1. Choose Battery Save from the Tools menu, choose Display, then 

highlight the desired time-out.

2. Press the OK button.

The Image LCD turns off when the Display Battery Save time elapses.