Canon 7428B002 User Manual

Page of 170
49
Recording Video
Canon Log Gamma and CINEMA Preset
You can easily set the camcorder to use a number of preset picture-
related settings especially designed with professional cinematography 
and motion picture production in mind. With the CINEMA preset settings, 
the gamma and color matrix (A 95) will be set to the advanced Canon 
Log setting, which makes full use of the newly developed image sensor to 
offer spectacular dynamic range. On the other hand, other custom picture 
settings will not be available.
Clips recorded using Canon Log gamma need to be processed in post-production. During post-production, you 
can apply a LUT (look-up table) to clips recorded using Canon Log gamma to view the clips with more natural 
colors. For details about available LUTs, visit your local Canon Web site.
1 Open  the  [/ CINEMA Locked] submenu.
[~ Camera Setup] > [/ CINEMA Locked]
2 Select [On] and then press the joystick.
• All picture-related settings will be set according to the CINEMA preset values.
• [/ LOCKED] appears on the left of the screen.
1 Remaining battery time
• The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the battery 
pack. When a battery pack compatible with Intelligent System is used, the remaining recording/playback 
time of the battery pack is displayed, in minutes, next to the icon.
• è 
 é  ê  ë  ì (in red). 
When ì is displayed, replace the battery pack with a fully charged one.
• Depending on the conditions under which the camcorder and the battery pack are used, the actual 
battery charge may not be indicated accurately.
2 SD card status/available recording time
• The following indicates the SD card status.
2/3 Can record on SD card
4/5 No SD card or cannot record on SD card
The SD card selected for recording is indicated with a Ð mark.
14 Recording operation
• When double slot recording (A 41) is activated, the 4 icon will appear to the left of the operation indicator.
• During continuous recording mode (A 85), [CONT] will appear to the left of the operation indicator.
Ü
REC
Recording
STBY
Record pause
Ü
PRE REC
Pre-recording (after pressing the START/STOP button)
PRE REC STBY
Pre-recording (before pressing the START/STOP button)
[~ Camera Setup]
[/ CINEMA Locked]
[Off]
COP
Y