Kodak DCS 700 User Manual
9-5
9
Fl
a
s
h
Setting Up Your Camera for Flash Photography
1
Press and hold the ISO button
and rotate the Main-Command
dial to set the desired ISO. Refer
to “ISO” on page 8-9.
and rotate the Main-Command
dial to set the desired ISO. Refer
to “ISO” on page 8-9.
The setting appears in the Back
Status LCD panel.
Status LCD panel.
2
Confirm that you are using a
D-type AF Nikkor lens, AF
Nikkor lens (except for AF
Nikkor for F3AF) or AI-P
Nikkor lens.
D-type AF Nikkor lens, AF
Nikkor lens (except for AF
Nikkor for F3AF) or AI-P
Nikkor lens.
If you use a different type of
lens, Auto Aperture mode will
not be possible. (In this case,
Non-TTL Auto Flash mode is
recommended.) Refer to the
“Non-TTL Auto Flash Mode”
section of the SB-28 instruction
manual.
lens, Auto Aperture mode will
not be possible. (In this case,
Non-TTL Auto Flash mode is
recommended.) Refer to the
“Non-TTL Auto Flash Mode”
section of the SB-28 instruction
manual.
3
Set the lens to the minimum
aperture.
aperture.
AF-ON
AF-L
AE-L
L
CSM
BKT
ISO
MENU
TAG/
RECORD