Kodak DCS 700 User Manual
9-10
Using the SB-28D Speedlight
.
1
Turn the camera on.
2
Turn the Speedlight on by
pressing its ON/OFF button for
approximately 0.5 seconds.
pressing its ON/OFF button for
approximately 0.5 seconds.
The Speedlight’s Ready light
comes on as soon as the flash is
recycled and ready to fire.
comes on as soon as the flash is
recycled and ready to fire.
☛
If your subject is relatively far
off, wait several seconds after
the Ready light turns on before
capturing the image.
off, wait several seconds after
the Ready light turns on before
capturing the image.
3
Aim the camera at the subject.
4
Press the Shutter Release button
to capture the image.
to capture the image.
☛
If the Ready lights on the
Speedlight and inside the
camera viewfinder blink for
approximately 3 seconds after
you capture the image, the
light may be insufficient for
correct exposure. If this
occurs, use a wider aperture or
move closer to the subject
before capturing any more
images.
Speedlight and inside the
camera viewfinder blink for
approximately 3 seconds after
you capture the image, the
light may be insufficient for
correct exposure. If this
occurs, use a wider aperture or
move closer to the subject
before capturing any more
images.
5
Wait for a few seconds until the
Ready light comes on again
indicating that the flash is ready.
Capture a few more images,
changing exposure
compensation on the flash or on
the camera, as needed.
Ready light comes on again
indicating that the flash is ready.
Capture a few more images,
changing exposure
compensation on the flash or on
the camera, as needed.
SEL
MODE
ZOOM
ISO
ZOOM
mm
m
18
13
9
6
4
3
1.5
1
0.6 0.8
2
FLASH
ON / OFF
A
STBY