Kodak DCS 700 User Manual
11-20
Obtaining the Meter Reading in Manual Exposure Mode
If you are using Manual Exposure mode and want to set an exposure for a specific
brightness value within the scene, switch to Center-Weighted (page 6-10) or Spot metering
(page 6-11) and use the following method.
brightness value within the scene, switch to Center-Weighted (page 6-10) or Spot metering
(page 6-11) and use the following method.
1
Center the main subject inside
the viewfinder and/or move in
closer until the reference circle
for Center-Weighted Metering
or Spot Metering is fully
covered by the subject.
the viewfinder and/or move in
closer until the reference circle
for Center-Weighted Metering
or Spot Metering is fully
covered by the subject.
2
Lightly press the Shutter
Release button.
Release button.
F
N
F
O
O
MODE