Kodak C330 User Manual

Page of 74
46
www.kodak.com/go/support
Troubleshooting
Direct printing (PictBridge) problems
Ready light glows 
steady green
Shutter button is pressed halfway down. Focus and exposure are set. 
Camera is operating normally.
Ready light glows 
steady orange
The Mode dial is set to Favorites. Camera is operating normally.
Ready light blinks 
orange
Flash is not charged. Wait. Resume picture-taking when the light stops 
blinking and turns off.
Auto exposure or auto-focus are not set. Release the Shutter button 
and recompose the picture.
Ready light glows 
steady red
Camera’s internal memory or card is full. Transfer pictures to the 
computer (
), delete pictures from camera (
), switch 
image storage locations (
), or insert card with available 
memory (
).
Camera processing memory is full. Wait. Resume picture-taking when 
the light turns off.
Card is read-only. Change image storage location to internal memory 
(
), or use a different card.
Status 
Solution
Cannot locate desired picture.
Turn the Mode dial to Auto. Make sure the camera is 
not in Favorites mode.
Use the Direct print menu to change the image storage 
location.
The Direct print menu interface 
turns off.
Press any button to redisplay the menu.
Cannot print pictures.
Ensure that there is a connection between camera and 
printer (
).
Ensure the printer and camera have power (
Camera or printer display an 
error message.
Follow the prompts to resolve the issue.