Kodak 645 User Manual
The Basics
61
Charging Batteries
1
Plug the cable from the charger’s AC adapter
into the battery charger port.
into the battery charger port.
2
Select the appropriate included international
power cord and plug the AC adapter into a
wall outlet.
power cord and plug the AC adapter into a
wall outlet.
3
Insert one or two batteries in the slots in the
battery charger. (Use either slot when
charging only one battery.)
battery charger. (Use either slot when
charging only one battery.)
On average, batteries are rapid-charged in
approximately 2 1/2 hours. If two batteries are
inserted, they are charged simultaneously.
approximately 2 1/2 hours. If two batteries are
inserted, they are charged simultaneously.
The following table shows the battery charger
status as indicated by each state of the LEDs.
status as indicated by each state of the LEDs.
LEDs
Battery
charger port
1
Cannot rapid charge at this time. Slow charge may
be active.
2
Poor contact (reseat battery pack), battery pack is
bad, charger failure.
Battery Charger Status
LED Display
Waiting to charge
1
Flashing Yellow
Charging
Red
Charged (90% capacity)
Flashing Green
Fully charged
Green
Fault
2
Flashing Red