Gigaset Euroset 5030 S30350-S207-D801 User Manual

euroset 5030 / IM eng-fra / A30350-M207-A801-2-5819 / 5030_en.fm / 11.7.06

GB

No signal tone: The tone volume might be set to 0.
Lift handset, no dialling tone: Is the connecting lead 

correctly plugged into the telephone and the telephone 

socket?
Dialling tone audible but telephone will not dial: 

The connection is OK. Is the dialling mode set correctly 

(see page 7)?
PABX only: No connection or incorrect connection 

Program external line prefix.
The other party cannot hear you: Have you pressed the 

Mute key? Press the key again. Is the plug from the handset 

cord inserted correctly?
Recall key does not work: Set appropriate flash time.
The caller's phone number and the calls list are not 

displayed:

Is the network device connected (see page 2)? Can Calling 

Line Identification be used (see page 8)?

Blank insert strips for the repertory keys can be found on 

the Internet at http://www.siemens.com/euroset.

If you should encounter any problems when operating the 

telephone connected to a communication system with 

analogue network access, please contact the network 

operator responsible or your dealer.

This device is intended for analogue phone lines in your net-

work.
Country-specific requirements have been taken into consid-

eration.
We, Siemens Home and Office Communication Devices 

GmbH & Co. KG, declare that this device meets the essential 

requirements and other relevant regulations laid down in 

Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is availa-

ble at this Internet address:

http://www.siemens.com/gigasetdocs.