Leica 18485 User Manual

Taking pictures

[Scene Mode]

- 114 -

 •How to select a scene 

(→108)

Pictures are recorded continuously while moving the camera horizontally, and two 

pictures selected automatically are combined to make a single 3D picture. 

To view 3D pictures, a television that supports 3D is required (This camera will play back 

in 2D). 

(→205)

 •3D still pictures are recorded in the MPO format (3D).

 •The resolution is fixed to 2M 

.

 •A guide is displayed while recording. 

 •Move the camera approximately 10cm (4″) 

within approximately 4 seconds using the guide.

 •Stationary subjects should be preferred.

 •Bright locations or outdoor situations should be preferred.

 •Press the shutter button halfway to fix focus and exposure, press it fully, and then 

pan the camera.

 •Hold the camera so that the subject is slightly to the right of the center on the 

screen at the start of the recording. This makes it easier to position the subject in 

the center of the recorded picture.

 

●

 

●

The zoom lens is fixed to the shortest focal length /the utmost W-position.

 

●

The ISO sensitivity is automatically adjusted. However, it is increased to make the 

shutter speed faster.

 

●

Motion pictures cannot be recorded.

 

●

[Stabilizer] mode does not work.

 

●

When any of the recording conditions listed below exist, it may be impossible to 

record any images at all. Or there may be no 3D effect, or the image may be distorted 

even if a picture is recorded.

 •When the subject is too dark or too bright

 •When the subject’s brightness changes

 •When the subject is moving

 •When the subject lacks contrast