Canon PowerShot A20 User Guide

Page of 124
20
Battery Status Indications
The LCD monitor displays an icon or
message to let you know when batteries
are low or depleted.
Installing a CF Card
1
Be sure that the camera is
turned off.
Battery Performance
* The actual performance may vary from the above data
according to the shooting conditions and the selected
recording mode.
<Test Conditions>
Shooting: Room temperature (23 
°
C, 73 
°
F),
alternating between wide angle and
telephoto every 20 seconds, flash used
one in four shots, power turned off and
on again after every eighth shot.
Replay:
Room temperature (23 
°
C, 73 
°
F),
continuous replay at 3 seconds per
image.
Number of Shots
Replay 
Time
LCD Monitor ON LCD Monitor OFF
AA Alkaline 
Batteries 
(included with 
the camera)
AA NiMH 
Battery NB-1AH
Approx. 
240 min. 
Approx. 
200 shots
Approx. 
500 shots
Approx. 
240 min. 
Approx. 
350 shots
Approx. 
1000 shots
Batteries are beginning to run low.
Replace (or recharge) batteries
promptly.
If the LCD monitor is off, this icon
will appear when you press any of
the following buttons:   
/
 , or
 /
 .
Change
the
batteries
Batteries are fully depleted and the
camera can no longer operate. You
should replace the batteries
immediately.
downloadlike
ArtboardArtboardArtboard
Report Bug