Canon 4460B003 User Manual
159
z Menu Function Settings
Silent shootingN
• Mode 1
• Mode 1
The shooting operation noise is quieter than with normal shooting.
Continuous shooting is also possible. High-speed continuous
shooting will be approx. 5 fps.
Continuous shooting is also possible. High-speed continuous
shooting will be approx. 5 fps.
• Mode 2
When you press the shutter button completely, only one shot will
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will
resume. The shooting noise is thereby minimized. Even if
continuous shooting is set, only a single shot can be taken in this
mode.
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will
resume. The shooting noise is thereby minimized. Even if
continuous shooting is set, only a single shot can be taken in this
mode.
• Disable
If you use a TS-E lens to make vertical shift movements or use
an Extension Tube, be sure to set this to [Disable]. Setting it to
[Mode 1] or [Mode 2] will result in incorrect or irregular exposures.
When you press the shutter button completely, the shutter will
sound like it took two shots. However, only one shot will be taken.
an Extension Tube, be sure to set this to [Disable]. Setting it to
[Mode 1] or [Mode 2] will result in incorrect or irregular exposures.
When you press the shutter button completely, the shutter will
sound like it took two shots. However, only one shot will be taken.
Metering timerN
You can change how long the exposure setting is displayed (AE lock
time).
You can change how long the exposure setting is displayed (AE lock
time).
If you use flash, the [Disable] operation will take effect even if you had
set it to [Mode 1] or [Mode 2].
set it to [Mode 1] or [Mode 2].
When using a non-Canon flash unit, set it to [Disable]. (The flash will not
fire if it is set to [Mode 1] or [Mode 2].)
fire if it is set to [Mode 1] or [Mode 2].)
If you select [y Dust Delete Data], [6 Sensor cleaning], [7 Clear all
camera settings], or [7 Firmware Ver.], the Live View shooting will be
terminated.
camera settings], or [7 Firmware Ver.], the Live View shooting will be
terminated.
COP
Y