Canon 6558B001 User Manual

340

The EF-S18-135mm f/3.5-5.6 IS STM utilizes a stepping motor that drives 
the focus lens. The motor also controls the focus lens during zooming.
1. When the camera is OFF

The motor does not operate while the camera is OFF or when the 
camera is OFF due to the use of the auto power off function. 
Therefore, users must be aware of the following points.

 

Manual focus adjustments are not possible.

 

During zooming, delayed focus will occur.

If not operated for a certain period of time, this lens will enter sleep 
mode in order to save power. Sleep mode differs from when the 
camera is OFF due to the use of the auto power off function. To exit 
sleep mode, press the shutter button halfway. In this state, the motor 
will not operate even if the camera is ON. Therefore, users must be 
aware of the following points.

 

Manual focus adjustments are not possible.

 

During zooming, delayed focus will occur.

When the camera is ON or when the camera is turned ON by 
pressing the shutter button halfway down when the camera is OFF 
due to the use of the auto power off function*

1

, the lens performs an 

initial reset of the focus lens.

 

Although the image in the viewfinder will appear out of focus 
during the initial reset, this does not mean that the lens has 
malfunctioned.

 

Although the shutter can be released during the initial reset, users 
must wait approximately 1 second*

2

 after the initial reset has 

completed before shooting.

*1: Applicable to the following EF-S lens compatible digital SLR cameras:

EOS 7D, EOS 60D, EOS 50D, EOS 40D, EOS 30D, EOS 20D, EOS 20Da, 
EOS REBEL T3i/600D, EOS REBEL T2i/550D, EOS REBEL T1i/500D, EOS 
REBEL XSi/450D, EOS REBEL T3/1100D, EOS REBEL XS/1000D, EOS 
DIGITAL REBEL XTi/400D DIGITAL, EOS DIGITAL REBEL XT/350D DIGITAL, 
EOS DIGITAL REBEL/300D DIGITAL

*2: The initial reset time varies depending on camera being used.

COP

Y