Canon 0140C001 User Manual

95

Still Images

Movies

Before using an Eye-Fi card, always confirm that local use is permitted.

Inserting a prepared Eye-Fi card enables automatic wireless transfer of 

images to a computer or uploading to a photo-sharing website.

Images are transferred by the Eye-Fi card. Refer to the card’s user manual 

or contact the manufacturer for instructions on preparing and using cards or 

resolving transfer problems.

When using an Eye-Fi card, keep the following points in mind.

- 

Cards may continue to transmit radio waves even when [Eye-Fi 

trans.] is set to [Disable] (

). Remove the Eye-Fi card before 

entering hospitals, aircraft, or other areas where transmission is 

prohibited.

- 

When troubleshooting image transfer issues, check the card and 

computer settings. For details, refer to the card’s user manual.

- 

Poor Eye-Fi connections may cause image transfer to take a long 

time, and transfer may be interrupted in some cases.

- 

Eye-Fi cards may become hot, due to their transfer functions.

- 

Battery power will be consumed faster than in normal use.

- 

Camera operation may become sluggish. To resolve this, try 

setting [Eye-Fi trans.] to [Disable].

Connection status of Eye-Fi cards in the camera can be checked on the 

shooting screen (in regular information display mode) or playback screen (in 

simple information display mode).

(Gray)

Not connected

Interrupted

(Blinking white) Connecting

Not communicating

(White)

Connected

Error acquiring Eye-Fi card information*

2

(Animated)

Transfer in progress*

1

*1 Power saving (

) on the camera is temporarily disabled during image transfer.

*2 Restart the camera. Repeated display of this icon may indicate a problem with the 

card.

Images labeled with a [ ] icon have been transferred.

Check the access point SSID used by the Eye-Fi card or the connection 

status, as needed.

z

z

Press the <

n> button, choose 

[Eye-Fi Settings] on the [

3] tab, and then 

press the <

m> button.

z

z

Choose [Connection info], and then press 

the <

m> button.

z

z

The connection information screen is 

displayed.