Casio EX-Z37 User Manual

Using the Camera with a Computer

Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to
your Macintosh.

• The camera does not

draw power over the USB
cable. Make sure the
camera’s battery is
sufficiently charged
before connecting.

• Make sure that you insert

the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert
the connector fully can
result in poor
communication or
malfunction.

• Note that even while the

connector is fully inserted, you still will be able to see the metal
part of the connector as shown in the illustration.

• When connecting the USB cable to a USB port, make sure you

align the connector correctly with the port.

• Your computer may not be able to recognize the camera if you

connect via a USB hub. Always connect directly to the
computer’s USB port.

Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.

Double-click the camera’s drive icon.

USB port

USB cable

Making sure that the mark on the USB cable
connector is towards the lens side, connect the
cable to the camera.

USB/AV port

Large connector

Small connector