Casio K1160PCM2DMX User Manual

127

Other Settings (Set Up)

[MENU] * Set Up Tab * Sounds

• Setting a volume level of 0 mutes output.

[MENU] * Set Up Tab * File No.

Use the following procedure to specify the rule that governs generation of the serial 
number used in file names (page 123).

Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off

Specifies the sound volume. This setting is also used as the 
audio level during video output (page 133).

Specifies the volume of movie audio output. This volume 
setting is not used during video output (from the USB/AV port) 
(page 133).

Tells the camera to remember the last used file number. A new file will 
be named using the next sequential number, even if files are deleted or 
if a blank memory card is loaded. If a memory card is loaded and that 
card already has files stored on it and the largest sequential number in 
the existing file names is greater than the largest sequential number 
remembered by the camera, numbering of new files will start from the 
largest sequential number in the existing file names plus 1.

Restarts the serial number from 0001 whenever all files are deleted or 
when the memory card is replaced with a blank one. If a memory card 
is loaded and that card already has files stored on it, numbering of new 
files will start from the largest sequential number in the existing file 
names number plus 1.

=

=