Casio e110 User Manual

• Be sure to turn off the camera, computer, and all pe-

ripherals connected to the computer (monitor, hard
disk, etc.) before connecting the camera to the com-
puter.

• After connecting the camera to the computer, slide the

REC/PLAY selector to “PLAY”, and then turn on the
camera. Data communication with a computer is dis-
abled while the camera is in the REC mode.

• Never connect or disconnect the cable while a data

communication operation is in progress. Doing so can
cause problems with program execution, can corrupt
data, and can damage the camera and your computer.

• Data transfer while camera batteries are low can re-

sult in unexpected shutdown of the camera. Because
of this, use of the optional AC adaptor is recom-
mended whenever performing data communication
with the camera.

• This camera does not support data communication

with any of the optionally available CASIO PC link
software applications: LK-1, LK-1A, LK-10V, LK-11W,
LK-2, LK-2A, LK-2V, LK-21.

In addition to the cable connections described in the previ-
ous sections, you can also exchange data between your
camera and computer by reading it directly from the memory
card. The Photo Loader software that comes on the bundled
CD-ROM disc automatically reads the images from the
memory card and stores them in folders on your computer’s
hard disk.
The following provides general information about how to di-
rectly read images from a memory card. Certain details may
be different depending on the type of computer you are us-
ing.

■

Simply insert the memory card into your computer’s
CompactFlash card slot.