Casio EX-S12 User Manual

Page of 216
186
Appendix
Images are being 
transferred.
Stop transfer and 
turn off power?
You are attempting to turn off power while image data is being 
transferred using the Eye-Fi card (page 139). 
LENS ERROR
This message appears and the camera turns off whenever 
lens performs some unexpected operation. If the same 
message appears after you turn power back on, contact a 
CASIO authorized service center or your original retailer.
Load paper!
The printer ran out of paper while printing.
Memory Full
Memory is full with images you recorded and/or files saved by 
editing operations. Delete files you no longer need (page 29).
Printing Error
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record Error
Image compression could not be performed for some reason 
during image data storage. Shoot the image again.
RETRY POWER 
ON
The lens came into contact with an obstruction while moving. 
The camera will turn off automatically when this message 
appears. Remove the obstruction and turn power back on 
again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or an 
authorized CASIO authorized service center.
The card is 
locked.
The LOCK switch of the SD or SDHC memory 
card loaded in the camera is in the locked 
position. You cannot store images to or delete 
images from a memory card that is locked.
There are no files. There are no files in built-in memory or on the memory card.
There are no 
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure 
the required DPOF settings (page 120).
There is no image 
to register.
The setup you are trying to save is for an image that cannot 
be saved as a user BEST SHOT scene.
This card is not 
formatted.
The memory card loaded in the camera is not formatted. 
Format the memory card (page 161).
LOCK