Cannon FS10/FS11/FS100 User Manual

35

• Keep at least 1 m (3.3 ft.) away from the 

subject. At full wide angle, you can 
focus on a subject as close as 1 cm 
(0.39 in.).

• When [ZOOM SPEED] is set to 

[

VARIABLE]: 

- When you use the T and W buttons on 

the wireless controller or LCD panel, 
the zoom speed will be constant at 
[

 SPEED 3].

- The zoom speed will be faster in 

record pause mode than when actually 
recording.

When you close the LCD panel with the 
camcorder on, the camcorder enters 
the standby mode. In standby mode the 
camcorder consumes only about half 
the power used when recording, saving 
energy when you are using a battery 
pack. Additionally, when you open the 
LCD panel, the camcorder is ready to 
start recording in approximately 
1 second, ensuring you do not miss 
important shooting opportunities.

A beep will sound and the 

 

indicator will change to orange to 
indicate the camcorder entered the 
standby mode.

Within less than 1 second, the 

 indicator will return to green 

and the camcorder will be ready to 
record.

Do not disconnect the power source 
during standby mode (while the 

 

indicator is lit in orange). 

• If you close the LCD panel under some 

circumstances (for example while 
recording, while a menu is being 
displayed, while the battery charge is 
low, or while the memory card slot cover 
is open), the camcorder may not enter 
the standby mode. Check that the 

 indicator changes to orange.

• The camcorder will shut off if left in 

standby mode for 10 minutes, 
regardless of the [POWER SAVE] setting 
(

80). Press 

 to turn on the 

camcorder.

• You can select the length of time until 

shut-off or turn off the Quick Start function 
with the [QUICK START] setting (

Even in 

 mode you can play back 

the last scene recorded in order to 
check it. You can also delete the scene 
while reviewing it.

(

(

24)

ON/OFF