Cannon FS10/FS11/FS100 User Manual

63

• If the still image index screen is 

displayed, move the zoom lever 
toward T to display a single image.

•

 appears and changes to 

.

• The 

 (print/share) button lights 

up and the current print settings 
will be displayed for approx.
6 seconds.

• If 

 continues to flash (for more than 1 

minute) or if 

 does not appear, the 

camcorder is not correctly connected to 
the printer. In such case, disconnect the 
USB cable and turn off the camcorder 
and the printer. After a short while, turn 
them on again, set the camcorder to 

 mode and restore the connection.

• During the following operations, even if 

you connect a printer to the camcorder 
it will not be recognized.
- Erasing all still images
- Erasing all transfer orders
- Erasing all print orders

•

 will appear for images that cannot be 

printed. 

• We recommend powering the 

camcorder using the compact power 
adapter.

• Refer also to the printer’s instruction 

manual.

• If you have no intention to use the 

optional DW-100 DVD Burner, you can 
set [USB SETTING] to [

PC/PRINTER] 

(

 so the device type selection 

screen does not appear every time you 
connect the camcorder to a printer.

• Connection to a PictBridge-compatible 

printer will not work when the memory 
card contains 1,800 images or more.

• For best performance, we recommend 

keeping the number of images on the 
memory card under 100.

• Disconnect the USB cable before 

changing the mode dial.

You can print a still image without 
changing the settings simply by 
pressing .

• Printing starts. The 

 button 

flashes and stays on when the 
printing is completed.

• To continue printing, select (

) 

another still image.

You can select the number of copies 
and other settings for printing. The 
setting options vary depending on your 
printer model.

(