Concord Camera 4340z User Manual

 

-22- 

 

 

 

 

 

 

 

 
 
 
1. Press 

the    / /   button to switch 

between Drive modes until the selected 

drive mode icon appears on the LCD 

monitor. 

2.  Shoot the image. 
 
 

•

    If you selected Self-Timer ( ), after the Shutter button is fully pressed down, the red 

Self -Timer LED in the front of the camera will blink slowly for 7 seconds, faster for the 

remaining 3 seconds, then the image will be captured.   

•

    The Self-Timer is automatically deactivated once the image is taken. 

 

•

    The camera will automatically and continuously capture 3 consecutive images at 

approximately 1 images per second in 1600 x 1200 resolution. 

•

    To exit the Continuous Shooting function, press the 

  button until   disappears 

from the LCD. 

 

Ten seconds 

 

3 images at 1600 x 1200 resolution 

1.  Focus range mentioned is the distance between the camera 

lens surface and the subject. 

2.  Any flash setting can be used in macro mode. 
3.  Always use the LCD monitor to compose images in macro 

mode. Shooting with the optical viewfinder is possible, 
however, images composed with the optical viewfinder might 
be off-center due to the parallax phenomenon.