Clover Electronics HDC041 User Manual

 
 
 
 
 
 
If the camera does not function properly, check the following points before contacting the 
service center. 
 

Troubles Remedies 

No video 

Check the AC adapter and video cable 
between the camera and a monitor 

The image on the screen is dark 

Check the brightness control on the 
monitor 

The image on the screen is dim 

Check if the lens is stained. If dirty, 
clean it with soft and clean cloth 

The camera is not working properly, and 
the surface of the camera case is hot 

Check if you have connected the 
provided AC adapter  

The contrast on the screen is too weak 

Adjust the contrast feature of the 
monitor. If the camera is exposed under 
too strong light, change the position 

The image on the screen flickers 

Does the camera face to directly to the 
sunlight or fluorescent light? Change the 
camera position 

Picture rolls and jumps, scrambled 
picture 

Improper V-hold control. Setting on your 
monitor 

Picture smaller than screen 

House current may be too low 

 
 
 
 
 

•  Image sensor   

 

           1/3” SONY Super HAD CCD 

•  Total pixels                                          811(H) x 508(V) 

•  Effective Pixels  

                       768(H) x 494(V) 

•  Scanning system                                  2:1 Interlace 

•  O.S.D   

                                   Available 

•  Backlight 

 

 

           Off / HSBLC / BLC selectable 

•  Resolution 

 

 

           550TV Lines(color),600TV Lines(B/W) 

•  S/N (Y signal)   

 

           52dB (AGC Off, Weight On) 

Note:  
▪ Apply DC12V 250 mA regulated power supply (not included). 
▪ To avoid fire or shock hazard, use a UL listed power supply.