Concord Camera 5062AF User Manual

9

The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.

To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
 

1.   Turn the camera on.
2.   Set the camera to (       ) Camera Mode.
     The LCD can be switched off to save battery power by pressing the (      ) button.
3.   Frame the subject in the viewfinder. (fig.1.1)
4.   Press the Shutter button half-way to activate the auto-focus until the green AF LED stops blinking.
      •  The camera will automatically determine the right focus, and a rapid click sound can be heard. 

Note: For more information on Focus Lock, please go to page 11. To change AF mode, please refer to p. 24.

5.  Press the Shutter button fully to capture the image. (fig.1.3)

•   The camera will make a click sound.
•   The camera will beep when the image is captured.
•   When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that 

the image is being stored.

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

Use the camera mode to 
take pictures or to customize 
your camera settings for 
picture taking.

Use the review mode to 
browse through images and 
video clips, to delete images 
and video clips, to play a 
slide show, or to transfer 
the images/video clips from 
the internal memory to the 
SD card. 

Use video clip mode to 
capture video clips with 
sound or to customize your 
camera settings for video clip 
recording.

 

⁄   ⁄ 

 

⁄   ⁄ 

4

M

28/45

 

⁄   ⁄ 

4

M

28/45

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

GETTING STARTED / TAKING A PICTURE

fig.1.1

fig.1.2

fig.1.3

DC4062-5062 UG(514173-00)-E   9

5/31/04, 9:57:59 AM