Casio EX-Z27 User Manual

Page of 142
122
Appendix
Any and all unauthorized commercial copying, distribution, and copying of the 
bundled software over a network are prohibited.
This product’s YouTube upload functionality is included under license from YouTube, 
LLC. The presence of YouTube upload functionality in this product is not an 
endorsement or recommendation of the product by YouTube, LLC.
.
If the camera’s back lamp starts flashing red...
• Ambient temperature or the temperature of the battery may be either too high or 
too low. Disconnect the USB cable and wait until temperature is within the 
allowable charging range before trying again.
• Battery contacts may be dirty. Wipe them with a dry cloth.
• Try connecting to a different computer USB port. Depending on the setup of your 
computer, you may not be able to charge the camera’s battery over a USB 
connection.
1.
Open the battery cover and remove 
the current battery.
With the monitor screen side of the 
camera facing upwards, slide the stopper 
in the direction indicated by the arrow in 
the illustration. After the battery pops out, 
pull it the rest of the way out of the 
camera.
2.
Load a new battery.
Power Supply
Charging
If problems continue to occur after you perform the above steps, it could mean that 
the battery is faulty. Contact your nearest CASIO authorized service center.
To replace the battery
Stopper