Casio EX-FC300S User Manual
27
Quick Start Basics
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 170). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 170). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Press [ON/OFF] (Power) to turn on the
camera.
camera.
2.
Use [8], [2], [4], and [6] to select the
language you want and then press
[SET].
language you want and then press
[SET].
3.
Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2015
YY/MM/DD
YY/MM/DD
*
15/7/10
DD/MM/YY
*
10/7/15
MM/DD/YY
*
7/10/15
4.
Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, select
“24h” and then use [8] and [2] to change the setting.
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, select
“24h” and then use [8] and [2] to change the setting.
5.
After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
to select “Apply” and then press [SET].
Configuring Basic Settings the First Time You Turn On the
Camera
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: page 170
– Date and time: page 169
– Date and time: page 169
[ON/OFF] (Power)