Casio EX-FC300S User Manual
64
Snapshot Tutorial
Use the procedure below to configure Handsfree Mode settings.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the “r REC MENU” tab, and then
press [6].
press [6].
3.
Use [8] and [2] to select “Handsfree” and then press [SET].
4.
Configure Handsfree settings.
Use the procedure below to reposition the motion detection area
(Start self-timer
icon) as required when it (or the preview icon
) hinders your view of the display
image.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the
“r REC MENU” tab, and then press [6].
“r REC MENU” tab, and then press [6].
3.
Use [8] and [2] to select “Motion Position”
and then press [SET].
and then press [SET].
4.
Press [RING].
• This will select one of the two icons on the
display. Pressing [RING] toggles the selection
between the start self-timer icon and the preview icon.
between the start self-timer icon and the preview icon.
Configuring Handsfree Mode Settings (Handsfree)
Setting
Description
Motion Shutter
Specifies the camera operation that enters the Handsfree
Mode.
Always:
Mode.
Always:
The camera always remains in the Handsfree Mode,
regardless of whether or not the monitor screen is tilted.
regardless of whether or not the monitor screen is tilted.
180°only:
The camera enters the Handsfree Mode only when the
monitor screen is tilted upwards 180 degrees.
monitor screen is tilted upwards 180 degrees.
Off: Handsfree Mode disabled
Timer
Specifies the amount of time that should elapse until
shooting starts after the camera detects movement.
Settings: 0.5 sec, 1 sec, 2 sec, 10 sec
shooting starts after the camera detects movement.
Settings: 0.5 sec, 1 sec, 2 sec, 10 sec
Repositioning the Motion Detection Area (Motion Position)
Start self-timer icon
Preview icon