AGFA ePHOTO 1280 User Manual
Changing Basic Settings (cont.)
To change the flash setting for the camera:
◗
With the camera in REC mode, press in the EasyPilot button. Four icons appear in the
upper left-hand corner of the LCD screen.
upper left-hand corner of the LCD screen.
◗
Turn the EasyPilot button to highlight the Flash icon.
◗
Press in the EasyPilot button again. A column of settings appears below the Flash icon.
◗
Turn the EasyPilot button in either direction to highlight the flash settings in order.
◗
When the desired flash setting is highlighted, press in the EasyPilot button. The new flash
setting is now selected.
setting is now selected.
!
Note: You can leave the menu system at any time without making any changes by simply
pressing the Info button.
pressing the Info button.
Changing the Preview Setting
The ePhoto 1280 provides two preview settings for viewing a scene on the LCD screen. With
the normal (default) preview setting, the LCD screen shows the scene as it is seen through
the lens. The low light setting displays dark scenes more brightly so you can see details bet-
ter to frame your shot.
the normal (default) preview setting, the LCD screen shows the scene as it is seen through
the lens. The low light setting displays dark scenes more brightly so you can see details bet-
ter to frame your shot.
!
Note: The low light preview setting is provided only to help you view the scene more clear-
ly on the LCD screen. The actual image you take may look different, depending on which
flash and other settings you use. When you turn the camera off, the normal preview setting
is restored.
ly on the LCD screen. The actual image you take may look different, depending on which
flash and other settings you use. When you turn the camera off, the normal preview setting
is restored.
24