AGFA ePHOTO 1280 User Manual
Troubleshooting (cont.)
The built-in flash doesn’t work.
◗
The flash may be turned off. Check the
◗
The batteries may be too weak. Replace them.
The recorded image is blurry.
◗
The subject may have moved while you were taking the picture. Hold the camera steady
and take the picture again.
and take the picture again.
◗
You may have moved the camera before it beeped, signaling that the image was captured.
Take the picture again and hold the camera steady until you hear the beep.
Take the picture again and hold the camera steady until you hear the beep.
◗
You may have used the wrong
. Make sure the subject’s distance from the
lens and the focus setting match. The flash illuminates subjects up to a distance of only
about 7 feet (2.6 m).
about 7 feet (2.6 m).
The recorded image is too dark.
◗
◗
The subject may be too far away for the flash. The flash illuminates subjects up to a dis-
tance of only about 8.5 feet (2.6 m).
tance of only about 8.5 feet (2.6 m).
54