AGFA ePHOTO 1280 User Manual
Troubleshooting (cont.)
◗
(Macintosh users)
You may have one of the following problems:
– AppleTalk may be active. Turn off AppleTalk before using PhotoWise.
– If the serial cable is connected to the modem port, turn off any fax/modem soft-
ware that is running in the background.
– If you are using an Apple Performa 6400 or 5400, the serial cable may have
grounding problems. For best results, update your operating system to System
7.6.1 or higher. If you cannot update your system, disconnect the camera, reboot
the computer and reconnect the camera.
7.6.1 or higher. If you cannot update your system, disconnect the camera, reboot
the computer and reconnect the camera.
◗
There may be an internal device conflict in your computer. Check the documentation that
came with your computer and/or operating system software.
came with your computer and/or operating system software.
An image can’t be deleted.
◗
Camera Care and Maintenance
Your ePhoto 1280 requires minimal maintenance. Before you perform any maintenance
procedures, read the
procedures, read the
section of this User’s Guide. Then follow these
guidelines:
◗
Never use harsh or abrasive cleaners on the outside surfaces of the camera. Wipe off dust
with a clean, dry cloth.
with a clean, dry cloth.
57