Zebra Technologies TTP 2000 User Manual

Maintenance
Firmware

P1002902-002

TTP 2000 Technical Manual

09/14/2009

The firmware is stored in flash-PROM on the control board. A replacement control board may 
not contain the same firmware version that you are currently using, so if you replace control 
board for some reason, upgrade it to the firmware version you want to use.

Download the firmware from the Zebra web site 

. There you will also 

find the Toolbox utility program (Windows™ software) facilitating the loading of the 
firmware into the printer.

Are you using a Windows environment to load the firmware?

.

Functions and features are being added from time to time affecting the firmware in the printer. 

Please visit our web site 

 for the latest firmware version. 

Always design your kiosk system so that remote upgrade of firmware is 

possible. If you need to upgrade firmware in the future, the kiosks can be spread over a vast 
area and upgrade can become very expensive.

No

Send <ESC><NUL> (1B 00 hex) to the printer.

Wait 0.5 seconds.

Send the firmware file to the printer.

Wait until the printer buzzes to confirm that the loading is complete (the 
presenter motor runs for a second).

Yes

The loader program contains a help file with detailed instructions on how to 
load the firmware into the printer

The loading and burning can take up to one minute. Do not abort before one 

minute by turning OFF the power to the printer. Doing so may leave the printer in a state 
where new firmware cannot be loaded. If this occurs, please return the printer to a Zebra 
authorized service provider or repair center.