Zebra Technologies TTP 2000 User Manual

Specifications
Dimensions

P1002902-002

TTP 2000 Technical Manual

09/14/2009

The flexible design of the Universal roll holder offers a number of paper roll positions for easy 
installation of the printer in a variety of kiosk designs. There are three positions for horizontal 
installations including High, Low and Under as well as a High position for vertical 
installations. The roll holder arm can also be attached to the left or right side of the printer 
which provides additional flexibility in kiosk installation.

The Universal roll holder spindle does not need to be adjusted for different paper widths. It can 
accomodate all four paper widths supported by the TTP 2000 printer including 58mm, 60mm, 
80mm and 82.5mm.

The roll holder arm alone accomodates paper rolls with an outer diameter up to 200mm in the 
High position. The addition of the 104208 Adapter with strain relief is required in both the 
Low and Under positions. The adapter used with the flexible roll holder arm supports paper 
roll diameters up to 200mm in the Low position and up to 250mm in the Under position. An 
optional paper low sensor can also be used with this roll holder.

The optional mechanical shutter adds 7 mm to the depth of the printer. The shutter is 

not suitable for use with the retract function.