Zebra Technologies TTP 2000 User Manual

Programming
Software Command Syntax

P1002902-002

TTP 2000 Technical Manual

09/14/2009

Text received by the printer is printed with the currently selected font and font attributes. Text 
exceeding the page width is wrapped with the line spacing selected.

Changes the orientation of text and logotypes.

Portrait and landscape or upside down portrait and upside down landscape can be mixed on the 
same printout. There are two cursors, one for portrait and one for landscape. The cursor always 
starts at the top left corner of the document. Looking at the paper when it exits the printer, the 
portrait cursor is at the top left corner of the printout, moving to the right as text is typed, while 
the landscape cursor is at the top right corner, moving downwards.

Changes the alignment of text and logotypes printed with ESC L on the current line; on 
subsequent lines, it defaults back to Left align. The alignment can be changed multiple times 
per text line.

1B 6F n1 

hex

27 111 n1 

decimal

n1 = 0

Gives portrait orientation

n1 = 1

Gives landscape orientation

n1 = 2

Gives upside down portrait orientation

n1 = 3

Gives upside down landscape orientation

The upside-down orientations (n1 = 2 and n1 = 3) were introduced in firmware version 

3.27g. They can only be used with Fixed Document mode.

1B 4E  n1

hex

27 78  n1

decimal

n1 = 0

Left

n1 = 1

Center

n1 = 2

Right