Kodak 100 PLUS User Manual

1-8

A-61588  July 2008 

Carefully unpack the Scan Station 100 and place it on a clean, dry and 
level surface. Locate and attach the power cord, network cable and the 
input and output trays. Make sure the Scan Station cover is closed. 

1. Select the appropriate AC power cord.

2. Plug one end of the power cord into the Scan Station.

3. Plug the other end of the power cord into the wall outlet. 

1. Select a (customer provided) 10/100 Base T drop cable.

2. Plug one end of the network cable into the network port of the Scan 

Station located on the back of the scanner.

3. Plug the other end of the network cable into the network drop’s wall 

outlet. 

1. Locate the input tray slots on the Scan Station.

2. Align the input tray pins with the slots.

3. Push down on the input tray until it snaps into place.