Kodak 100 PLUS User Manual

A-61588  July 2008

4-27

The Scan Station uses the Microsoft “Point and Print” technology for 
installing print drivers and connecting to network printers. Typically, 
network printers are attached to print servers which manage the 
scheduling of print jobs for one or more network printers. These print 
servers manage print queues for each connected printer and can also 
deliver and install print drivers to other network PCs or devices. 

The Scan Station can connect to printers in the following ways:

• Connect to a printer that is connected to a print server on a network 

domain.

• Connect to a printer that is shared by another computer on a network 

workgroup.

• Connect to a network printer that is directly connected to the network 

via an Ethernet cable plugged directly into a router or hub.

In each of these scenarios, Microsoft Windows may also require login 
credentials for any device requesting access to a network printer. Each 
of the scenarios listed above is described in more detail below.

1. Enter any text that describes the printer in the Description field. 

2. Enter the fully qualified path to the print server and print queue (e.g., 

\\printservername\printqueue or \\192.168.1.101\printqueue).

NOTE: The use of IP addresses when accessing a print server is 

guaranteed to resolve the path to the printer. Fully qualified 
domain names may not resolve in certain network 
environments.

3. If the network domain is configured to require authentication to 

install a printer driver, enter the Username, Password, and 
Network Domain names.

4. When finished, click OK.

NOTE: If proper authentication is not provided, the printer and its driver 

may not be installed on the Scan Station.