Fujitsu C150-E049-02EN User Manual
4-16
M3099GX/GH OEM Manual
7 To re-install lamp/heater,
reverse procedures in item
4 above.
4 above.
Note:
Make sure to rotate lamp in
the direction as shown in the
left figure.
Make sure to rotate lamp in
the direction as shown in the
left figure.
8 Align the lamp unit with
the grooves on the machine
and insert the lamp unit
completely. Then, turn the
thumb screw completely to
avoid cover open error.
and insert the lamp unit
completely. Then, turn the
thumb screw completely to
avoid cover open error.
9 Attach the side cover.
Replace the roller ASY as follows:
WARNING
Wait at least 3 minutes after turning off the power before
replacement.
Wait at least 3 minutes after turning off the power before
replacement.
Roller ASY
Replacement
Replacement
Power switch
Lever
1 Turn off the power switch.
2 Open the upper transport
unit. (See page 4-2)
Window
Socket
Lamp unit
Thumb screw
Operator panel
Upper transport unit