Fujitsu fi-486PRRE User Manual
146
6.2 Document Quality
■ Precautions
The following documents sometimes may have difficulty to feed with this scanner. To prevent
unexpected troubles, preliminary feed test using the same quality paper as the target
documents may be necessary.
unexpected troubles, preliminary feed test using the same quality paper as the target
documents may be necessary.
- Document with clips or staples
- Document written on with ink and still wet
- Document without a constant thickness
- Document with rumples or curls (refer to the HINT on page 120)
- Document with folds or tears
- Tracing paper
- Coated paper
- Carbon paper
- Carbonless paper
- Document smaller than A7 or larger than A3
- Materials other than paper: fabric, metal foil, or transparencies.
- Photosensitive paper
- Perforated or punched documents
- Non-rectangular documents
- Very thin paper
HINT
- When scanning a translucent document, set
the scanner density to light to avoid bleed
through.
through.
- To prevent the rollers from getting dirty, avoid
scanning documents containing large areas
written or filled in with pencil. If scanning of
such documents is necessary, clean the
rollers frequently.
written or filled in with pencil. If scanning of
such documents is necessary, clean the
rollers frequently.
・ When document jams or double feed happens
frequently , please refer to "5.1 Document
Jam", "Document separation force adjust-
ment".
Jam", "Document separation force adjust-
ment".