Fujitsu FI-6230Z User Manual
Chapter 6 Daily Care
110
The outside of the scanner, including the ADF paper chute
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
fi-6130Z/fi-6140Z
fi-6230Z/fi-6240Z
6.2 Cleaning the Outside
！
！
！
z
Never use paint thinner or any other organic solvents
because it may result in deformation or discoloration.
because it may result in deformation or discoloration.
z
Be careful not to let any moisture or water inside the
scanner during cleaning.
scanner during cleaning.
z
It may take a long time to dry if an excessive amount of
Cleaner F1/mild detergent is used. Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the
cleaned parts.
Cleaner F1/mild detergent is used. Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the
cleaned parts.
Thinner
Cleaner F1
or mild detergent
or mild detergent
Cloth
Cleaning Wipe
Thinner
Cleaner F1
or mild detergent
or mild detergent
Cloth
Cleaning Wipe