Fujitsu FI-6230Z User Manual
Chapter 9 Operational Settings
169
Adjusting the Position to Start the Scan
[Offset/Vertical magnification Adjustment]
[Offset/Vertical magnification Adjustment]
When the output position of the scanned image is not correct
or the image appears shortened/elongated (vertically), adjust
the offset and the vertical magnification in the following
procedure.
or the image appears shortened/elongated (vertically), adjust
the offset and the vertical magnification in the following
procedure.
1
Start up the Software Operation Panel.
.
2
From the listing on the left, select [Device Setting] and
click the [Offset] button.
click the [Offset] button.
9.5 Settings Related to Scanning
！
！
！
Normally, you should not have to make any adjustments as the
factory default settings are configured at appropriate values.
factory default settings are configured at appropriate values.