Fujitsu FI-6230Z User Manual
Chapter 9 Operational Settings
180
Specifying a Multifeed Detection Method
[Multifeed]
[Multifeed]
Multifeed is an error where two or more sheets are fed through
the ADF at once. It is also called a multifeed when a different
document length is detected.
Not noticing multifeed errors while scanning may put you in a
situation where important data are missing from the scanned
images. Multifeed detection can be used to prevent such
troubles. When this function is enabled, an error message is
displayed as soon as it detects a multifeed, and stops the
scan. Note that multifeed cannot be detected within 30 mm
from the leading edge of the document.
the ADF at once. It is also called a multifeed when a different
document length is detected.
Not noticing multifeed errors while scanning may put you in a
situation where important data are missing from the scanned
images. Multifeed detection can be used to prevent such
troubles. When this function is enabled, an error message is
displayed as soon as it detects a multifeed, and stops the
scan. Note that multifeed cannot be detected within 30 mm
from the leading edge of the document.
1
Start up the Software Operation Panel.
.
2
From the listing on the left, select [Device Setting 2] J
[Multifeed].
[Multifeed].
9.6 Settings Related to Multifeed Detection