Fujitsu FI-6230Z User Manual
Chapter 9 Operational Settings
188
Method of Turning the Scanner ON/OFF
[Power SW Control]
[Power SW Control]
The method by which the scanner is powered on/off can be
specified from one of the following:
specified from one of the following:
z
Press the [Power] button on the operator panel
z
Unplug the power cable then plug it back in
z
Have the scanner turn on/off in sync with the computer's power
1
Start up the Software Operation Panel.
.
2
From the listing on the left, select [Device Setting 2] J
[Power SW Control].
[Power SW Control].
3
Select one of the following:
9.8 Settings Related to Power ON/OFF
[Enable power switch] : Press the [Power] button on the operator
panel.
[Disable power switch] : Unplug the power cable then plug it back
in.
[Enable USB power
feeding]
feeding]
: Have the scanner turn ON/OFF in sync
with the computer's power.
！
！
！
Some types of computers and USB hubs keep supplying
power to the USB bus even after the computer is turned
off.
In that case, the [Enable USB power feeding] mode may
not work properly.
power to the USB bus even after the computer is turned
off.
In that case, the [Enable USB power feeding] mode may
not work properly.