Fujitsu FI-6230Z User Manual
Chapter 1 Scanner Overview
31
Power saving mode keeps the power consumption low when
the scanner has not been used for a certain period of time.
If the scanner is left powered on for 15 minutes without being
used, it automatically enters power saving mode.
When it enters power saving mode, the Function Number
Display switches off but the [Power] button remains lit in
green.
To resume from power saving mode, perform one of the
following:
the scanner has not been used for a certain period of time.
If the scanner is left powered on for 15 minutes without being
used, it automatically enters power saving mode.
When it enters power saving mode, the Function Number
Display switches off but the [Power] button remains lit in
green.
To resume from power saving mode, perform one of the
following:
z
Load a document in the ADF paper chute
z
Press any button on the operator panel
Note that pressing the [Power] button for more than 2 seconds will
turn the power off.
Note that pressing the [Power] button for more than 2 seconds will
turn the power off.
z
Perform scanning from an application
1.8 Power Saving Mode
！
！
！
The scanner may not enter power saving mode if there was a
document remaining on the paper path.
For details about how to remove documents, refer to
document remaining on the paper path.
For details about how to remove documents, refer to
.