Fujitsu C150-E141-02EN User Manual

 1-7

After power is turned on, the LCD indicates the following messages in normal mode.

Please wait

Wait for a moment.  This is indicated when processing takes a long
time.

When this is displayed after turning power on, the second line
indicates initializing messages.

Ready

The scanner can receive a command from the host computer  or
can be set in setup, browse, or test mode.

Manual Feeding

Load documents on the hopper table manually.

Feeding

The scanner is feeding documents.  The second line indicates the
number of documents fed per batch.

Transferring Data

The scanner is sending data to the host computer.

When the scanner detects errors, the LCD indicates the following messages.  There are two types of
errors: temporary errors and equipment errors.

Temporary errors:

The message is cleared just by following the next message.

Hopper empty

Mis-pick

Cover open

Equipment errors:

To clear the message, you must clean or replace the specified part.

Optical error: Front

Fuse alarm: Front lamp