Fujitsu C150-E141-02EN User Manual
6-10
<<SETUP MODE>>
Paper Length Check
Ready
Paper Length Check
ON 10 mm
4.
Press
.
The current difference 10 mm blinks (blinking
indicates “changeable”).
indicates “changeable”).
5.
Press
or
.
The displayed option changes (15 mm or 20 mm).
6.
When the desired value appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Paper Length Check).
menu screen (Paper Length Check).
7.
Press
CANCEL
two times.
The LCD returns to the Ready screen.
Paper Length Check
ON 20 mm
Paper thickness check
This function determines whether or not to enable the paper thickness which is set by the “paper
thickness setup” function to detect a double feed error. You cannot change settings if they are set by
the host computer.
thickness setup” function to detect a double feed error. You cannot change settings if they are set by
the host computer.
Remarks
LCD display
Paper Thickness Check
Options
On, Off (Default: Off)
The following is an example of operation when you use this function.
1.
In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check