Fujitsu C150-E141-02EN User Manual

 6-45

This function inhibits the operator panel from entering setup mode from normal mode, protecting the
operator panel from misoperation.  Once the operator panel is locked, you cannot use the setup items
except those allocated to the 

F1

, 

F2

, and 

F3

 buttons.

You cannot use this function when the setup mode is brought by pressing 

MENU

 in the Ready

status.

Setup Mode Lock

On, Off (Default: Off)

1.

In <<SETUP MODE>> initial screen, press

ENTER

.

The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.

The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.

2.

Press 

 repeatedly until “Setup Mode

Lock” appears in the lower line of the menu
screen.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>>

Paper Length Check

<<SETUP MODE>>

Setup Mode Lock

To cancel the setup mode lock state, turn off the power and turn on the power while pressing the

MENU

 button to enter the setup mode.  In the setup mode, select the Setup Mode Lock function

and set the option to OFF.

The following is an example of operation when you use this function.