Fujitsu C150-E141-02EN User Manual
6-49
Test item
Description
Offline feed test
Scans sheets continuously for checking conditions of paper feeding.
Options
Displays the options installed in the scanner.
Device life
Displays the accumulative number of sheets fed and the accumulative number of hours for
lamps lit since the scanner has been installed, to estimate the life of the device.
lamps lit since the scanner has been installed, to estimate the life of the device.
Sensor auto adjustment
Automatically adjusts sensors.
Offset auto adjustment
Adjusts offset using adjustment sheets.
Operation panel test
Tests functions of the LCD, LEDs, and buttons to check the operator panel.
ROM revision
Displays the revision of the program EPROM.
Sensor status
Displays the status of the sensors.
Sensor adjustment
Changes the current and slice level of sensors to adjust the sensors.
+5V voltage check
Displays the voltage of +5 volts.
EEPROM edit
Writes arbitrary data in EEPROM (address 00 to 127) to confirm or change the set values.
Image memory capacity
Displays the capacity of the image memory.
The test mode includes the user test functions listed in the following table. This section explains
“Offline feed test”, “Options”, and “Device life” which are necessary for users.
“Offline feed test”, “Options”, and “Device life” which are necessary for users.
NOTE
If you must need to use user test functions other than “Offline feed test”, “Options”, and “Device
life”, contact your dealer.
life”, contact your dealer.
The user test functions are as follows:
Contents of the Test Mode